Aluminum Detachable 25KG Anti Ram Vehicle Barriers

Movable and Portable Vehicle Crash Barrier Stop moving vehicle 

The main material of this product is hollow aluminum profile, Among them, the bottom contains 3 pieces of rubber with a thickness of 10 mm, and there is an iron plate with a thickness of 2.3 mm inside this rubber plate, whose function is to increase the friction between rubber and the ground. Its weight is very light, even a worker can easily move it. And there are two rubber wheels with a diameter of 10 cm are installed at the bottom, which make the device more convenient to move.

  ►►A person can move it alone, which is very convenient.

Compared with the road crash barriers on the market, some need to be piled and fixed on the ground(such installation work is very time-consuming and labor-consuming, and will cause damage to urban roads); Some are made of iron (very heavy and easy to rust, resulting in an unsightly appearance, which is not conducive to urban beautification construction); Others are plastic (not only rough workmanship, but also pollute the environment. Moreover, the plastic material is not durable, high-cost and consumption).

Traditional construction sections set mode, only equipped with safety cones, safety signages, lack of crash barriers. In this case, if the driver straies into a restricted zone, because the safety cones and safety signage do not have the function of intercepting the car, it may cause casualties.

Traditional way of road setting :

. 

Lack of buffer stop equipment is very dangerous for construction personnel.

The plastic anti-collision bucket material is fragile and has little resistance, which cannot effectively stop the vehicle from moving forward.

Our portable vehicle crash barrier is made of recyclable aluminum. If serious damage is caused by impact, this material can also be sold or recycled, which greatly reduces purchase costs. Its weight is only 25 kg/unit, and wheels are installed at the bottom, it can be easily moved by one person.

Our products have been widely used and recognized in Japan.The example in the picture is used for road maintenance in Nagoya city, Japan.It is usually used in two sets, and you can set according to the road conditions.

This product does not need to be piled on the ground, as long as placed in the construction or other required places as needed.It can be moved whenever and wherever possible without wasting working hours, which is very time-saving and labor-saving, greatly reducing the staff’s workload.

Another advantage: it can be folded, the height after folding is 400mm, the width is 860mm, and the length is 1077mm, which saves storage space.

►►It is can be folded and packed. The height of a 40-inch container can hold 26 tins, each holding 8 mobile guardrail.